Servicing Areas Throughout New Jersey

Furnace and boiler maintenance in Monmouth and Ocean County, NJ

Catch it in the fall, not on the first cold night.

Heating maintenance from a plumbing and heating shop

Furnaces and boilers

One visit covers whichever system heats your home: a gas furnace or a hot water boiler.

The gas and water side too

We are plumbers as well as heating techs, so the gas connection, venting, boiler piping and condensate drain get checked on the same visit.

A straight answer on what you need

If something is wearing out, we show you and tell you how urgent it is. You decide what gets fixed, and when.

Licensed in New Jersey

NJ HIC #13VH08721900 and NJ Plumbers LIC #1289700. Family owned, based in Manasquan, rated 4.9 stars from 770+ Google reviews.

A boiler room with two large gray boilers connected to yellow and red pipes. The room has a concrete floor and white walls, with various valves and gauges mounted on the equipment.
A clean, well-organized utility room features a blue boiler system, a sleek blue water heater, and multiple pipes. Natural light streams in through a small window, highlighting the white walls and ceiling. While the floor is light-colored tile, the space's seamless layout ensures easy access for any sewer line repair needs.

What heating maintenance covers

A yearly check before the cold sets in

Heating maintenance is a yearly inspection, cleaning and test of your furnace or boiler, done before the season starts. The goal is simple: find the worn igniter, the weak pump or the dirty burner in October, not at 2 a.m. in January.

A person wearing red and black gloves uses a screwdriver to adjust a control panel with wires exposed, possibly performing maintenance or trenchless water line repair work.

Furnace tune-up checklist

What we check on a gas furnace

Every visit, in this order

  • Thermostat calls for heat and the furnace answers.
  • Filter checked and replaced if you have one ready.
  • Igniter and flame sensor cleaned and tested.
  • Burners inspected and the flame checked.
  • Heat exchanger looked over for cracks or rust.
  • Inducer and blower motors, wiring and safety switches tested.
  • Venting and gas connection checked for leaks.
  • Condensate line cleared on high-efficiency furnaces.

Boiler maintenance

What we check on a hot water boiler

  • System pressure and temperature, cold and hot.
  • Expansion tank charge, so the relief valve does not drip.
  • Pressure relief valve and low-water cutoff.
  • Circulator pump and zone valves.
  • Burner, ignition and flue.
  • Air in the lines, with radiators bled where needed.
  • Visible piping and fittings for leaks or corrosion.

Why yearly heating service pays off

Fewer no-heat calls, longer life

Most no-heat calls trace back to parts that give warning first: a dirty flame sensor, a weak igniter, a waterlogged expansion tank. A yearly check finds them while they are cheap to fix. It also keeps the system running as efficiently as it can, and many manufacturers expect regular service to keep the warranty valid.

When to schedule a furnace tune-up

Early fall is best

September and October, before the first cold week, when everyone calls at once. If your heat is already acting up, skip the tune-up and book a repair: furnace repair or boiler repair. For cooling, see AC maintenance.

A man is repairing a furnace, working on the internal wiring and components. He wears glasses and a gray shirt. Colorful wires and metal parts are visible inside the open panel of the furnace.
A technician wearing a cap and overalls is adjusting a digital control panel on a wall-mounted boiler. Red and blue pipes are connected below the unit in a gray-tiled room. The technician holds a tablet in one hand.

Heating maintenance questions

How often should a furnace be serviced?

Once a year, before the heating season. Older systems or homes with pets or heavy dust can benefit from a mid-season filter check too.

Yes, for most homes. It is far cheaper than an emergency repair, catches safety problems like cracked heat exchangers or venting issues, and keeps the system efficient.

A full inspection, cleaning and test of the burners, ignition, safety controls, motors, venting and gas connection, plus the condensate line on high-efficiency units. See the checklist above.

Once a year, usually in the fall. Pressure, the expansion tank, the relief valve and the circulator pump are the parts that most often cause winter problems.

Change or check the filter every one to three months, keep the area around the furnace clear, and keep supply and return vents open. Leave the burners, gas and electrical parts to a licensed tech.

Some furnace and boiler manufacturers require regular professional maintenance to keep the warranty valid. Check your warranty papers, and keep the service record we leave you.

CONTACT US

Book your heating maintenance

Tell us whether you have a furnace or a boiler and where you are. Call 732-785-4226.