Reviews
You’re not calling a plumber because everything’s fine. You’re calling because it’s 20 degrees outside, your boiler’s making a noise you’ve never heard before, or worse—it just stopped working entirely.
When your heating system goes down in Mantoloking, it’s not just uncomfortable. It’s a problem that needs solving now. Frozen pipes, a cold house, and the stress of wondering how much this is going to cost.
Here’s what changes when the repair is done right. Your home stays warm through those brutal coastal wind chills. Your energy bills don’t spike because the system’s running efficiently again. And you’re not sitting around wondering when it’ll break down next because someone who knows what they’re doing actually fixed the root cause.
That’s the difference between a quick patch job and boiler repair that holds up. You get your heat back, your peace of mind back, and your winter back.
AME Plumbing Heating and Cooling is a family-owned company based in Monmouth County. We’re licensed, insured, and we’ve built a reputation on showing up when we say we will and doing the work right the first time.
Mantoloking isn’t like everywhere else. The salt air, the humidity, the coastal storms—they all take a toll on your heating system faster than they would inland. We’ve seen it all, from corroded pipes to frozen condensate lines, and we know how to fix it without dragging things out or upselling you on stuff you don’t need.
You’ll work with technicians who’ve been doing this long enough to diagnose the problem fast and explain what’s actually wrong in plain language. No jargon, no pressure, just honest answers and upfront pricing before any work starts.
First, you call or reach out online. If it’s an emergency, we prioritize getting someone to your door as fast as possible—day or night. If it’s a maintenance issue or something you’ve been putting off, we’ll schedule a time that works for you.
When we arrive, we’ll run a full diagnostic on your boiler. That means checking for leaks, testing pressure, inspecting the heat exchanger, and looking at all the components that tend to fail first. We use modern tools like thermal imaging to catch problems you can’t see with your eyes.
Once we know what’s wrong, we’ll walk you through it. You’ll get a clear explanation of the issue, what it takes to fix it, and what it costs—before we touch anything. No surprises, no hidden fees.
Then we fix it. We carry most common parts on the truck, so if it’s something straightforward like a faulty valve or a worn-out pump, we can usually handle it same-day. If it’s more involved, we’ll let you know the timeline and keep you updated the whole way.
After the repair, we test the system to make sure everything’s running the way it should. You’ll have heat again, and you’ll know exactly what we did and why.
Ready to get started?
Boiler repair covers a lot of ground depending on what’s failing. Common issues we handle include leaking water around the base, strange noises like banging or gurgling, uneven heating, and complete system shutdowns. Each one has a different cause, and each one needs a different fix.
In Mantoloking, we also deal with coastal-specific problems. Salt air accelerates corrosion on metal components. Humidity can cause issues with electrical connections and sensors. And during those stretches of extreme cold, condensate pipes freeze up and stop the whole system from working.
We handle all of it—leak repairs, pressure adjustments, pump and valve replacements, ignition system fixes, and full system diagnostics. If your boiler is older and parts are starting to wear out, we’ll be honest about what makes sense to repair versus what’s just throwing money at a system that’s on its way out.
You’ll also get maintenance advice that’s specific to living near the water. Things like how often to flush the system, what to watch for during winter, and when it makes sense to schedule a tune-up before the cold weather hits. The goal is to keep your boiler running longer and avoid emergency calls at 2 a.m.
It depends on what’s broken. A simple fix like replacing a pressure valve or resetting the system might run a few hundred dollars. More involved repairs—like a leaking heat exchanger or a failed circulator pump—can cost more, sometimes over a thousand depending on parts and labor.
We give you upfront pricing before we start any work. That means you’ll know exactly what it costs and what you’re paying for. No surprise charges, no inflated invoices after the fact.
The other thing to consider is whether the repair actually makes sense. If your boiler is 15 or 20 years old and major components are failing, sometimes it’s smarter to replace the unit than keep dumping money into repairs. We’ll give you an honest assessment either way.
Low water pressure is one of the biggest culprits. If the pressure drops too low, the boiler won’t fire up. That can happen because of a leak, a faulty pressure relief valve, or just normal system loss over time.
Frozen condensate pipes are another common issue, especially during those frigid stretches in January and February. When the pipe that drains condensation freezes, the boiler shuts down as a safety measure. It’s an easy fix, but it’ll stop your heat completely until it’s thawed and cleared.
Other frequent problems include faulty thermostats, airlocks in the system, broken pumps, and ignition failures. Older boilers also deal with sediment buildup and corroded components, particularly in coastal areas like Mantoloking where salt air speeds up wear and tear. Most of these issues are fixable if caught early.
If it’s something straightforward—like a pressure issue, a stuck valve, or a tripped safety switch—we can usually handle it in an hour or two. Most of the common repairs fall into that range, especially if we have the parts on the truck.
More complex jobs take longer. If we’re replacing a pump, fixing a significant leak, or dealing with multiple failing components, it might take half a day or more. We’ll give you a realistic timeline once we’ve diagnosed the problem.
Emergency repairs get prioritized. If your heat is out in the middle of winter, we move fast to get you up and running again, even if that means coming back later to finish up less urgent work. The goal is always to restore your heat as quickly as possible without cutting corners.
If your boiler is under 10 years old and the repair is minor, fixing it almost always makes sense. You’ll get more years out of the system, and the cost is manageable compared to replacement.
If your boiler is 15 years or older and you’re looking at a major repair—like a cracked heat exchanger or a failed control board—it’s worth running the numbers. At that age, you’re likely to face more breakdowns in the near future, and efficiency has probably dropped, which means higher energy bills.
We’ll walk you through both options with real numbers. Sometimes a repair buys you a few more years and that’s all you need. Other times, replacing the unit saves you money in the long run and gives you better performance and reliability. We’re not here to sell you something you don’t need—we’re here to give you the information so you can make the right call for your situation.
Yes. We’re available 24/7 for heating emergencies. If your boiler goes out in the middle of the night or during a winter storm, you can reach us and we’ll get someone out as fast as possible.
Emergency service means we prioritize your call and dispatch a technician right away. We know that losing heat in January isn’t something you can wait until Monday to deal with. It’s a safety issue, especially if you have kids, elderly family members, or pipes at risk of freezing.
We carry common parts and diagnostic equipment on every truck, so there’s a good chance we can fix the problem on the first visit. If we need to order a part, we’ll do everything we can to get your heat back on temporarily while we wait for it to arrive. The goal is always to minimize the time you’re without heat.
Once a year is the standard recommendation, ideally in the fall before you start relying on it daily. Annual maintenance catches small problems before they turn into expensive repairs or middle-of-winter breakdowns.
During a service visit, a technician will inspect all the key components—burners, heat exchanger, pumps, valves, pressure levels, and safety controls. They’ll clean out any sediment or buildup, test the system under load, and make sure everything’s running efficiently.
In Mantoloking, regular maintenance is even more important because of the coastal environment. Salt air and humidity accelerate corrosion and wear on metal parts. A yearly checkup helps you stay ahead of that and extends the life of your boiler. It also keeps your energy bills lower because a well-maintained system runs more efficiently than one that’s been neglected.
